If your ISP provides a static or fixed IP address, subnet mask, default gateway and DNS setting, please select Static IP. Host Name -This option specifies the name of the router.Otherwise, the DNS servers will be assigned automatically from your ISP. Set DNS server manually - If your ISP gives you one or two DNS addresses, select Set DNS server manually and enter the primary and secondary addresses into the correct fields.If you cannot get the IP address normally, you can choose this option. Get IP with Unicast - A few ISPs’ DHCP servers do not support the broadcast applications.It is not recommended that you change the default MTU size unless required by your ISP. MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes.If your ISP provides the DHCP service, please select Dynamic IP, and the router will automatically get IP parameters from your ISP.Ĭlick Renew to renew the IP parameters from your ISP.Ĭlick Release to release the IP parameters. System Up Time - The length of the time since the router was last powered on or reset.Ĭlick Refresh to get the latest status and settings of the router.ģ.Select the working mode as needed and click Save.ģ.Configure the IP parameters of the WAN and click Save.DNS Server - The IP addresses of DNS (Domain Name System) server.When you use Dynamic IP as the internet connection type, click Renew or Release here to obtain new IP parameters dynamically from the ISP or release them. Default Gateway - The Gateway currently used is shown here.Subnet Mask - The subnet mask associated with the WAN IP Address.This field will be blank or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet connection. IP Address - The current WAN (Internet) IP Address.
#UB ETHERNET STATUS MAC#
MAC Address - The physical address of the WAN port.WAN - This field displays the current settings of the WAN, and you can configure them on the Network > WAN page.MAC Address - The physical address of the router.Channel Width - The current wireless channel width in use.Channel - The current wireless channel in use.Mode - The current wireless mode which the router works on.Wireless Radio - Indicates whether the wireless radio feature of the router is enabled or disabled.Operation Mode - The current wireless working mode in use.Wireless - This field displays the basic information or status of the wireless function, and you can configure them on the Wireless > Basic Settings page.Subnet Mask - The subnet mask associated with the LAN IP address.
#UB ETHERNET STATUS PASSWORD#
Chapter 7 Configure the Router in Range Extender Modeġ.Visit, and log in with the username and password you set for the router.Ģ.Go to Status.Chapter 6 Configure the Router in Access Point Mode.Chapter 5 Configure the Router in WISP Mode.Chapter 4 Configure the Router in Wireless Router Mode.Chapter 1 Get to Know About Your Router.
0 kommentar(er)
